HP Injector is a precise synthetic formulation that exceeds the lubrication demands of modern two-cycle motors. Today's two-cycle outboard motors operate at higher temperatures and at leaner oil and fuel ratios than older motors. This difficult operating environment requires proper lubrication technology to keep motors running long and strong. HP Injector is a premium lubricant engineered with AMSOIL synthetic base oils and MAXDOSE advanced additives. It contains up to 30 percent more additives than other TC-W3 two-cycle oils for "super clean" operation. And because AMSOIL synthetic oils are more durable, they are perfect for lean mixture operations. In addition, this AMSOIL exclusive product produces low smoke and odor and has low aquatic toxicity properties, making it ideal for boats.

HP Injector improves engine life. It prevents deposits that cause ring sticking and ring jacking (carbon build-up behind the ring, forcing it outward), a phenomenon that occurs in modern DFI outboard motors. HP Injector prevents wear. It has excellent lubricity properties and provides a good lubricating oil film, protecting pistons and bearings. HP Injector prevents rust, an important feature where motors are subjected to water. HP Injector provides superior performance in direct fuel injected (DFI), electronic fuel injected (EFI) and carbureted outboard motors, as well as other recreational equipment.

Key Benefits to You:

Superior performance in DFI outboard motors
Prevents piston and combustion chamber deposits
Prevents "ring jacking" common to DFI outboards
Low smoke, low odor product
Contains up to 30 percent more additives for "super clean" operation
Prevents wear for long engine life
Prevents rust
Multi-functional and recommended for use in many two-cycle motors
Low aquatic toxicity
Recommended for use as injection oil or at a 50:1 pre-mix

Compatible Applications:

HP Injector is recommended for use in all two-cycle outboard motors including, but not limited to, Mercury® EFI & Optimax®, Johnson® and Evinrude® FICHT® and E-TEC™, Yamaha® HPDI, Nissan® and Tohatsu® TLDI®, Suzuki®, Mariner® and Force®. Also recommended for use in all two-cycle personal watercraft and jet boats, as well as snowmobiles, motorcycles and ATVs.

Meets and/or Exceeds These Performance Specs:

API TC
NMMA TC-W3

Recommendations for Use:

Use as injection oil or as 50:1 pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA TC-W3 or API TC oils are specified. Compatible with mineral and synthetic TC-W3 type two-cycle oils, however, mixing two-cycle oils should be minimized.

HP Injector Technical Specifications:

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	7.3
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	35.9
Viscosity Index (ASTM D-2270)	171
Pour Point °C (°F) (ASTM D 97)	-46 (-51)
Flash Point °C (°F) (ASTM D 92)	82 (180)
Fire Point °C (°F) (ASTM D 92)	82 (180)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.